Intelligent 208..277V Input - 160 Watt Power Source / Driver for ActiveLED® Lighting Systems

  • Intelligent ActiveLED® 160 Watt Power Source / Driver - Auto-sensing 208..277 VAC and 50/60 Hz for worldwide useage

  • Extremely reliable, highly efficient intelligent switch-mode power supply

  • Capable of driving one or many ActiveLED light fixtures, up to a combined maximum of 160 Watt of LEDs

  • Digitally dimable from 100% to 0% (Off) in 2% increments (digital rotary dimmer or LightSpace Manager optional)

  • Optional ActiveLED controls for additional energy savings:

    • Motion Sensor
    • Daylight Sensor
    • Digital Rotary Dimmer
    • LightSpace Manager
    • Battery Backup for
    emergency lighting
    • Dimming capabilities

  • LightSpace Management is implemented using the serial data link between power supplies, dimmers and motion / occupancy sensors

  • Battery Backup Enabled (optional), providing 48V DC support for an optional Emergency Battery Backup Unit (BBU) for an Emergency LED Light fixture

  • Designed and manufactured in USA

Intelligent 160 Watt Universal Power Source / Driver for ActiveLED® Lighting Systems

An extremely reliable, highly efficient intelligent 160 Watt Switch-Mode Power Source - for ActiveLED® Lighting Fixtures

The 160 Watt ActiveLED® Power Source / Driver has been specifically designed to power higher voltage LEDs with input voltages starting at 56V up to 110V for ActiveLED® and other DC LED Lighting fixtures. The ActiveLED Power Source can drive one LED or led strings within this voltage range up to a combined maximum of 160 Watt on its one channel.

The ActiveLED® 160 Watt Power Source supports ActiveLED LightSpace Management® for intelligent control and management of light output and power consumption of attached low-voltage LED light fixtures. The ActiveLED power source also supports an optional Emergency Battery Backup Unit (BBU) for powering an Emergency LED Light fixture

By deploying the optional dimmers, sensors and interconnection of ActiveLED light fixtures, additional energy savings can be achieved by managing the light output and on/off times to meet user occupancy, task and safety needs.

When used with LSM2-DMX dimming device the power supply will follow DMX512 dimming instructions while they are arriving, when DMX512 signals no longer arrive, the LSM2 revers to EDSaP dimming, EDSaP is ActiveLED's patented digital dimming system.

ActiveLED® Technology

The state-of-the-art electronics of the ActiveLED Power Source monitor current and temperature of the substrate to assure maximum performance under the prevailing environmental conditions.

The 1734 Power Source has 3 methods employed to protect the device during high voltage events and has been proven to be more robust in sites where frequent lightning events affect electronic equipment.

ActiveLED technology achieves a Lumen Lifetime of 90,000 hours (90% Luminous Flux) for all ActiveLED lighting fixtures.

ActiveLED® Warranties

We provide mechanically robust outdoor lighting systems; our warranties are 10 years on LED elements, fixtures and drivers / power supplies.

Ringdale is an ISO 9001:2015 company. Ringdale provides products of the highest quality designed and manufactured in Texas, USA and in the United Kingdom.

Component Part Numbers

00-27-0734-4106LED Enclosed Driver 100-277V Input 50/60Hz 4 Channels up to 30W per Channel 1400mA Max. 0-10V Dimming w/ Battery Backup (BBU)
00-27-0734-5106LED Enclosed Driver 208-277V Input 50/60Hz 1 Channel up to 160W 1400mA Max. 0-10V Dimming with Battery Backup (BBU)

Open Frame Power Supply / Driver Part Numbers

05-17345006PCB Assy LED Current Source 1734/6(G) Rev6 Single 110V output 160W Channel 0-10V Dimming
05-17345106 PCB Assy LED Current Source 1734/6(G) Rev6 Single 110V output 160W Channel 0-10V Dimming w/ Battery Backup (BBU)

Technical Information

Input Voltage:• 208..277 Volts AC, 50/60 Hz
• Or 48V DC
• Digital Power Source, dedicated circuit strongly recommended
LED Driver Output:One (1) current-controlled outputs, adjustable up to 1.6A
Power Factor & THD:PF: > 0.95 (at ~208..277Volts) THD: <20%, typical 9.5%
Operating Temperature:-50° C to +65° C (-58° F to +149° F)
Listings:cUL Class 2, E332932-3, to +40°C
CE, RoHS compliant, suitable for damp locations.
Conforms to FCC Part 15.19 Subpart B Class A
Dimensions:7-1/8" x 9-1/8" x 2-3/8" (18.1 x 23.2 x 6.0 cm)
Weight:2.4 lbs / 1.1 Kg

Caution! All specifications published herein are subject to change without notice. See website for Terms and Conditions of use of the website and the information provided herein. See Ringdale website on for Terms and Condtions of Sale and Service.

+44 (0)844 264 1570