12V AC Output x 10 - 100 Watt Load - 100..240V Universal Input Uninterruptible Power Supply with 60Wh Battery


  • 12V AC Transformer replacement. Universal Auto-sensing 100..240 VAC and 50/60 Hz input power allows worldwide usage for 12V low voltage applications.

    The 1770 can detect a full short on the output i.e.: When the cable is cut the unit will turn off for 1 minute, reducing or avoiding any arcing when the short is removed.

  • Capable of driving one or many ActiveLED® low voltage light fixtures, up to a combined maximum of 100 Watts

  • The uninterruptible power option as a 60Wh built-in battery option allowing for additional power when main supply fails.

  • 12V Sine Wave 50 or 60 Hz Output Power for use with any 12V AC device up to 100W.

  • Battery Interrupter button (when UPS option installed) to preserve battery during transport.

  • Switch Mode power supply and 12V inverter are more reliable than low-cost transformers due to ActiveLED's high efficiency electronics producing very little heat 7 Watt at full load.

  • IP 68 construction that is fully submersible in water or salt-water makes it fully water and vapor proof.

  • Switched output option (only on UPS version) provides one additional 12V-AC output that activates when charging power fails.

    The switched output can be used for a siren or a light that come on as an indication that emergency power from the battery has been activated.



100 Watt - 10 x 12V AC Output - 100..240V Universal Input Uninterruptible Power Supply (UPS) with Battery Backup Option

12V AC Sine Wave Power Supply with Battery Backup Option for ActiveLED® and other Low Voltage 12V AC devices such as spider lights. One output that comes on when power fails allows attachment of 12V-AC siren and / or a 12V-AC light.

Power Source to power ActiveLED® 12V AC Low Voltage Lighting fixtures and other 12V AC devices. The Power Source can drive up to 10 individually connected (in spider fashion) ActiveLED Lighting fixtures, up to a combined maximum of 100 Watt - single channel of 70 Watt.

The ActiveLED® Power Source includes a manual Battery Interrupter to allow charging of the device and then turning it off (once disconnected from the main power). Thus allowing the device to be transported with fully charged batteries.

The Uninterruptible 12V AC Output Power Supply can be used in conjunction with ActiveLED Low Voltage Explosion Proof light fixtures being in full compliance with OSHA requirements for portable lighting in wet or conductive locations in confined spaces (1926.405(a)(2)(ii)(G)).

Switched output option (only on UPS version)

Provides an additional 12V-AC output that activates when charging power fails. It can be used for a siren or a light that come on as an indication that emergency power from the battery has been activated.

Why Low Voltage AC in confined and conductive environments

Low voltage reduces the risk of electrocution from exposed wires. 12V is a low voltage, but, when exposed wires are dragged over a conductive surface DC can produce a much longer and sustained ark igniting most things. AC on the other hand interrupts an ark 60 times a second and produces a fraction of the energy in an ark compared to DC.

ActiveLED® Technology

Ringdale uses the latest in energy efficient Switch-Mode Power Supply and Inverter technology. The state-of-the-art electronics of the ActiveLED Power Source monitor current and temperature of the inverter and batteries to assure maximum performance under the prevailing environmental conditions.

This technology achieves a Product Lifetime of 90,000 hours with an 80% Battery Capacity retention after 2000 re-charges. The overall efficiency of the device is >92% (94% typical) making the device more efficient than a conventional transformer.

Batteries are re-charged after approx. two hours of runtime as 30W of power are reserved for re-charging or maintaining the battery (only applicable when emergency battery option is installed).

ActiveLED® Warranties

We provide mechanically robust power supply and lighting systems; our warranties are 10 years on Power Supply and 5 years on the Backup Batteries.

Ringdale is an ISO 9001:2015 company. Ringdale provides products of the highest quality designed and manufactured in Texas, USA and in the United Kingdom.

ActiveLED® 50Hz UPS AC Power Source with Battery Backup Part Number:00-27-0754-1150-B

ActiveLED® 60Hz Power Source without Battery Backup Part Number:00-27-0770-1160-N


Technical Information

Input Voltage:• Autosensing 100..240 Volt AC, 50/60 Hz

Output Voltage:12V AC Sine Wave - 5.8A - 50/60Hz
Maximum Load Power:up to 100 Watt Load
Maximum Wattage:Total wattage for Power Supply is 120 Watt
Operating Temperature:-50° C to +65° C (-58° F to +149° F)
Listings:CE, RoHS compliant, suitable for wet locations.
Conforms to FCC Part 15.19 Subpart B Class A
Dimensions:

Weight:
5.26" x 3.65" x 6.77" (13.3 x 9.3 x 17.2 cm)

5.5 lbs (2.4 Kg)
Part Number:00-27-0754-1260-B (with UPS)
00-27-0754-1260-N (no backup)

Caution! All specifications published herein are subject to change without notice. See website ActiveLED.com for Terms and Conditions of use of the website and the information provided herein. See Ringdale website on www.ringdale.com for Terms and Condtions of Sale and Service.

+1-888-288-9080
+44 (0)844 264 1570