00-27-0601-0000: Intelligent 56 Watt Power Source / Driver for ActiveLED® Lighting Systems

  • Universal Auto-sensing 100..277 VAC and 50/60 Hz ActiveLED® power supply / driver for worldwide useage

  • Unlimited number of power supplies can be daisy-chained, each power supply has a data-in and data-out connector for EDSaP compliant LightSpace™ Managers or to daisy-chain to the next fixture to build a lighting zone.

  • Capable of driving one or many ActiveLED® light fixtures, up to a combined maximum of 56 Watt

  • Digitally dimable from 100% to 0% (Off) in 2% increments (ActiveLED digital rotary dimmer, LightSpace Manager optional). One dimmer device can dim all the lights in a lighting zone. a lighting zone can have 1000's of devices.

  • Optional ActiveLED controls for additional energy savings:
    • Motion Sensor
    • Daylight Sensor
    • Digital Rotary Dimmer
    • LightSpace Manager
    • Battery Backup for
    emergency lighting

    EXAMPLE: A 56 Watt fixture that is dimmed down to light level 40 when there is no motion sensed consumes just 5.04 Watt (9% of 56 Watt), saving 91% or 50.96 Watt

  • LightSpace Management® is implemented using the EDSaP data link between power supplies, dimmers and motion / occupancy sensors

  • Battery Backup Enabled (optional), providing 48V DC support for an optional Emergency Battery Backup Unit (BBU) for an Emergency LED Light fixture

  • Designed and manufactured in-house by Ringdale with facilities in USA and UK

UL-Listed, programmable 56 Watt Universal Power Source / Driver for ActiveLED® Lighting Systems

An extremely reliable, highly efficient programmable 56 Watt Switch-Mode Power Source for ActiveLED® Lighting Fixtures with dimming, motion sensing and daylight sensing capability.

Intelligent Power Source to power ActiveLED® Lighting fixtures. The LED Power Source can drive one or many ActiveLED Lighting fixtures, up to a combined maximum of 56 Watt - two channels each of 28 Watt.

The ActiveLED Power Source supports 0-10V dimming and ActiveLED LightSpace Management® for intelligent control and management of light output and power consumption of attached low-voltage LED light fixtures. The ActiceLED power source also supports an optional Emergency Battery Backup Unit (BBU) for powering an Emergency LED Light fixture.

By deploying the optional dimmers, sensors and interconnection to ActiveLED light fixtures, additional energy savings can be achieved by managing the light output and on/off times to meet user occupancy, task and safety needs.

A 56 Watt ActiveLED fixture that is dimmed down to light level 40 when there is no motion sensed consumes just 5.04 Watt (9% of 56 Watt), saving 91% or 50.96 Watt

ActiveLED® Technology

Ringdale uses the latest in energy efficient LEDs and LED modules producing equivalent or greater light output than fluorescent (HID) fixtures. The state-of-the-art electronics of the ActiveLED Power Source monitor current and temperature of the substrate to assure maximum performance under the prevailing environmental conditions.
This technology achieves a Lumen Lifetime of 90,000 hours (90% Luminous Flux) for all ActiveLED lighting fixtures.

ActiveLED® Warranties

We provide mechanically robust outdoor lighting systems; our warranties are 10 years on LED elements, fixtures and drivers / power supplies.

Ringdale is an ISO 9001:2000 company, registered under BSI certificate FM-1880. Ringdale provides products of the highest quality designed and manufactured in Texas, USA and in the United Kingdom.

ActiveLED® Power Source Part Number:00-27-0601-0000

Technical Information

Input Voltage:• Autosensing 100..277 Volts AC, 50/60 Hz
• Or 48V DC
• Digital Power Source, dedicated circuit strongly recommended
Maximum Output (mA):Two (2) current-controlled outputs, adjustable from 350mA up to 900 mA per channel
Maximum Output (watts):Two (2) current-controlled outputs, up to 28 Watt per channel
Maximum Wattage:Total wattage for Power Supply is 62 Watt
Power Factor & THD:PF: > 0.95 (at ~100..277Volts) THD: <20%, typical 9.5%
Operating Temperature:-50° C to +65° C (-58° F to +149° F)
Listings:cUL Class 2, E332932, to +40°C
CE, RoHS compliant, suitable for damp locations.
Conforms to FCC Part 15.19 Subpart B Class A

7-1/8" x 9-1/8" x 2-3/8"
(18.1 x 23.2 x 6.0 cm)

2.4 lbs (1.1 Kg)

Caution! All specifications published herein are subject to change without notice. See website ActiveLED.com for Terms and Conditions of use of the website and the information provided herein. See Ringdale website on www.ringdale-technology.com for Terms and Condtions of Sale and Service.

+44 (0)844 264 1570