SL1-Sol Series ActiveLED® Solar-Ready Streetlights with Integrated Solar Controller

  • SL1-Sol Series ActiveLED® Solar-Ready Streetlight Fixtures - Integrated Solar Controller for cost-effective and simplified solar system design

  • Ideal applications include:
    • Streets
    • Parking lots
    • Walkways
    • Pedestrian areas
    • Other outdoor applications

  • Industry-leading integrated technology that delivers affordable and simplified Solar Lighting Systems by reducing the system to its base components:
    • Solar Fixture / Controller
    • Solar Array
    • Solar Battery Pack

  • Improved light quality and illumination uniformity compared to legacy bulb technology

    Lumen Lifetime of 90,000 hours (90% Luminous Flux)

  • Environmentally Safe Lighting:
    • Zero mercury content
    • Eliminates disposal of
    hazardous materials
    • Facilitates LEED® points

  • Optional controls for additional energy savings:
    • Motion Sensor
    • Light Space Management
    • IR Receiver module for
    remote management

  • Choice of light fixture wattage, see table for details

    Choice of fixture colors - Silver, White, Charcoal Grey, Bronze or Brown finish.
    Custom colors available on request

  • Choice of Clear or Mottled second Diffuser.
    Choice of Traditional or Wide Light Pattern.
    Choice of mounting options

SL1-Sol Series ActiveLED® Solar-Ready Streetlight Fixtures - Integrated Solar Controller for cost-effective and simplified solar system design

Solar-Ready ActiveLED® Streetlight Fixtures have a highly-efficient Solar Controller integrated into the LED Driver / Power Source.
The SL1-Sol Series is a market first from ActiveLED - a market leader in LED lighting systems

SL1-Sol Series ActiveLED fixtures make off-grid solar lighting an easy reality.

With an integrated Solar Controller, the SL1-Sol Series ActiveLED light fixtures have one less system component compared to other solar light solutions, making the installation and maintenance process far simpler and less expensive. The innovative SL1-Sol Series design effectively eliminates the need for a costly separate Solar Controller.

The Solar-Ready Street / Parking Lot / Walkway Lights are cost effective to install and have a light output similar to 75 through 600 Watt HPS / HID fixtures.

Both the Solar Array and the Battery Pack connect directly to the SL1-Sol fixture via low-voltage DC cables. One Solar Array (up to 220 watts and 46 Volts DC) and one Battery Pack (24 Volt DC or 48 Volt DC, 48 VDC recommended) are supported.

With its patented design and superior LED elements, the SL1-Sol Series of fixtures are a reliable light source with a 90,000-hour lumen life, making it a maintenance-free solution for applications where changing bulbs and ballasts can be hazardous and expensive.

ActiveLED® SL1-Sol Series Solar-Ready Product Overview

Any 24, 48 or 72 Watt version ActiveLED Street / Parking Lot / Walkway light fixture can be factory-configured as a Solar-Ready Streetlight Fixture. The following is just a small sample of some of the available configurations for different applications:

Product Code


Fixture Wattage

Light Output

Suggested Mount Height


Pathway / Parking Lot

26 Watt

~87 Lumens / Watt

4.0 m / 13 ft


Street / Highway

50 Watt

~87 Lumens / Watt

6.0 m / 20 ft


Pathway / Parking Lot

26 Watt

~87 Lumens / Watt

4.0 m / 13 ft


Street / Highway

50 Watt

~87 Lumens / Watt

6.0 m / 20 ft


Street / Highway

75 Watt

~87 Lumens / Watt

7.5 m / 25 ft

ActiveLED® Solar-Ready Series Light Fixture Selections

Solar-Ready ActiveLED light fixtures can be configured from a comprehensive list of options to meet most application requirements, including the following:



LED Light Output:

24, 48 or 72 Watt LEDs - 26, 50 or 75 Watt Fixtures

LED Light Pattern:

(T) Traditional, (W) Wide or (X) Xtra Wide Angle pattern

Fixture Color:

Silver, White, Charcoal Grey, Bronze or Brown

Daylight Sensor:

Solar Panel is the daylight sensor that triggers the light to turn on or off

Energy Management:

Optional Motion Sensor, LightSpace Management, IR Receiver Module

Timers for Energy Mgmt:

Three separate timers can be configured to manage light levels (dimming) during the night. Example: 100% on for 6 hours, at 65% for the next 5 hours and at 35% for the balance of the night

Fixture Direct Mounting:

Factory-configured: Square Pole, Round Arm or Pole Top

Mounting Bracket Options:

Comprehensive set of options, see separate datasheets for full list

Battery Pack Management

The ActiveLED SL-Sol series fixtures employ a highly efficient Integrated Solar Controller / Driver that has three levels of battery charging (the following data is for room temperature Sealed Lead Acid batteries):


Bulk Charging of the battery pack until the battery voltage reaches about 29.4 volts for a 24-volt system or about 58.8 volts for a 48-volt system.


Absorption charging for 2 hours.


Float or Trickle charging at 27.0 volts for a 24 volt system and 54 volts for a 48-volt system.

ActiveLED® Similar Products

ActiveLED Street Lighting Products provide superior surface illumination for increased safety and security as brighter, whiter light makes it easier to see detail and color. ActiveLED fixtures direct all light evenly to the target surface minimizing light pollution outside the targeted area while improving overall visibility.

ActiveLED® Technology

ActiveLED uses the latest in energy efficient LEDs and LED Modules producing equal or greater light output than fluorescent light fixtures. Our state-of-the-art electronics monitor current and temperature of the substrate to assure maximum performance under the prevailing environmental conditions and a Lumen Lifetime of 90,000 hours (90% Luminous Flux).

ActiveLED® Diffuser Technology

We use state-of-the-art diffuser technology with a minimal amount of light loss within the fixture providing for maximum lighting efficiency.

To meet varying application requirements, the ActiveLED Solar-Ready Street Lights can be configured with either a clear or a "diffused" second diffuser.
The second diffuser completely seals the underside of the fixture, preventing the ingress of water, dust and insects.

The ActiveLED Light Fixture with the clear low-iron glass second diffuser maintains the uniform light pattern and increases the task pattern. This is ideal for installations where a higher light level is required at the outer areas of the light pattern as it increases luminance by 15-20%, depending on the angle of light emanating from the fixture and the installation height. The textured second diffuser provides a more "diffused" light pattern, particularly where the light fixture is installed at a height of less than 12 feet.

ActiveLED® Streetlight Pattern Options

The ActiveLED Solar-Ready Streetlights are available in either Traditional or Wide light pattern configurations.

Traditional Pattern (Roadway Type II) - when mounted at 20 feet high, projects light 3-4 feet behind the pole and has an illumination pattern on the street-side in an arc of about 30 feet.

Wide Pattern (Roadway Type III) - has a broad uniform light coverage. Mounted at 20 feet high, it has a very precise 1-2 foot curb-side cut-off with very little light projected behind the curb line. It has an illumination pattern on the street-side in an arc of about 40-50 feet on each side of the curb line extending to 60 feet perpendicular at 90 degrees from the curb line on the street side.

ActiveLED® Warranties

We provide mechanically robust outdoor lighting systems; our warranties are 10 years on LED elements, fixtures, drivers / power supplies and integrated solar controllers.

ActiveLED is an ISO 9001:2000 company, registered under BSI certificate FM-1880. ActiveLED provides products of the highest quality that are 100% designed and manufactured in Texas, USA from locally sourced components.

NOTE: Pole and Pole Base are not included in the price.

ActiveLED®SL1-Sol Solar-Ready Street Lights, sample Part Numbers:

SL1SN-RM-WF5024, Round-Arm Mount, Wide Pattern 24 Watt.
SL1SN-RM-WF5048, Round-Arm Mount, Wide Pattern 48 Watt.
SL1SN-RM-XF5072, Round Arm Mount, Xtra-Wide Pattern, 72 Watt (Requires 48 VDC system).
SL1SN-SP-TF5024, Square Pole Mount, Traditional Pattern, 24 Watt.
SL1SN-SP-TF5048, Square Pole Mount, Traditional Pattern, 48 Watt.

Technical Information

Input Voltage: 24 Volts DC or 48 Volts DC (48 VDC recommended)
Note: No AC line support
Solar Array:

Battery Pack:
Rated for a Solar Array or Wind Turbine up to 250 Watts,
8 to 48 Volts DC, 6 Amps maximum

12 Volts DC or 48 Volts DC (48 VDC recommended)
Power Statistics:

Charging Efficiency:
Dependent upon model selected:
• Up to 72 Watt LEDs
• Up to 75 Watt Fixtures

> 96% typical
DC Drive Efficiency:

Listings & Tests:
~ 98%

cUL Listed Driver, suitable for damp locations.
TM21 based on CALIPER ISTM Test to UL1598
CALIPER LM-79 Report, LM-80 info available
CE File, RoHS compliant, IP66 Rated.
Conforms to FCC Part 15.19 Subpart B Class A
Operating Temperature:-58° F to +170 F (-50° F to +80° C)
IES Roadway Classifications:• Type II (Traditional Pattern)
• Type III (Wide Pattern)

6"(W) x 4"(H) x 30"(L)(15.2 x 10.2 x 76.2 cm)

20.5 lbs (9.3 Kg)
CCT Color Temperature:3500K, 4000K or 5000K, in accordance with ANSI C78.377A

Caution! All specifications published herein are subject to change without notice. See website for Terms and Conditions of use of the website and the information provided herein. See Ringdale website on for Terms and Condtions of Sale and Service.

+44 (0)844 264 1570