FL40-N Series ActiveLED® 40

  • DLC Certified and Listed versions of ActiveLED Flood Lights are available, please refer to relevant datasheet for specific model numbers.

  • FL40-N Series ActiveLED® 40" High Output Flood Lights - Narrow Beam for illuminating Statuary, Buildings, Parking Lots, Walkways and Landscaping, etc - 26 to 104 Watt Fixtures

  • FL40 Series Flood Lights run significantly cooler and are therefore much safer to the touch than traditional HID technology. Replaces up to 1,000 Watt legacy bulb technology

    High light output and a CCT5000K color temperature provides crisp, bright and even accent lighting that closely emulates natural daylight

  • Fraction of conventional lighting costs and very low maintenance cost with a Lumen Lifetime of 90,000 hours (90% Luminous Flux)

  • Available options for even greater energy savings:
    • Motion Sensor
    • Daylight Sensor
    • Dimming capabilities

    A 104 Watt Floodlight that is dimmed down to light level 40, when there is no motion sensed for example, consumes just 9.36 Watts (9% of 104 Watts), saving 94.64 Watts, 91%

  • Environmentally Safe Lighting:
    • Zero mercury content
    • Eliminates disposal of
    hazardous materials
    • Facilitates LEED® points

  • Choice of fixture color - Silver, Brown, White, Bronze or Charcoal Grey finish, other colors available on request

  • Precise adjustment of the angle of the flood light via the convenient end-mounting bolts (10mm) allows the fixture to be adjusted for maximum lighting effect

FL40-N Series ActiveLED® 40" High Output Flood Lights - Narrow Beam for illuminating Statuary, Buildings, Parking Lots, Walkways and Landscaping, etc - 26 to 104 Watt Fixtures

ActiveLED® flood lighting solves the problems of energy wastage, light pollution and maintenance. The design has optimized water management and cooling to be effective in the hottest of climates as well as performing without degradation down to -58° F (-50° C).

The FL40-N Series ActiveLED® Floodlights consume at least 50-85 percent less energy than conventional lighting.
With their patented design and superior LED elements, the ActiveLED Flood Lights are a reliable light source with a 90,000-hour lumen life (90% Luminous Flux), making them a maintenance-free solution for applications where changing bulbs and ballasts can be hazardous and expensive.

Significant additional energy savings from the device's optional daylight sensor, motion sensor and remote energy management features.

The FL40-N series ActiveLED Narrow Beam Flood Light illuminates Statuary, Buildings, Walkway, Parking Lots Landscaping, etc. evenly and with a bright light that closely emulates the color of natural daylight.

No matter what kind of area you have we have the right light fixtures to provide a bright and safe place to work.

All the available light is directed onto the object or building to be illuminated.

The employed technology delivers very precise light cut-off, virtually eliminating any light polution and overspill.

International Dark-Sky Association full cutoff compliant.

Fixture runs significantly cooler and is therefore much safer than traditional HID bulb technology.

FL40-N Series Product Overview

Ringdale provides five wattage sizes of ActiveLED Narrow Beam Flood Lights for varying applications:

Product Code

Fixture Length

CCT Color


Light Output

Suggested Mount Height


40 inches


26 Watt

~2,278 Lumens

Application Dependent


40 inches


38 Watt

~3,329 Lumens

Application Dependent


40 inches


50 Watt

~4,380 Lumens

Application Dependent


40 inches


75 Watt

~6,570 Lumens

Application Dependent


40 inches


102 Watt

~8,935 Lumens

Application Dependent

ActiveLED® Technology

Ringdale uses the latest in energy efficient LEDs and LED Modules producing equal or greater light output than HID light fixtures. Our state-of-the-art electronics monitor current and temperature of the substrate to assure maximum performance under the prevailing environmental conditions and a Lumen Lifetime of 90,000 hours (90% Luminous Flux).

ActiveLED® Diffuser Technology

We use state-of-the-art diffuser technology with a minimal amount of light loss within the fixture providing for maximum lighting efficiency.

ActiveLED® Warranties

We provide mechanically robust outdoor lighting systems; our warranties are 10 years on LED elements, fixtures and drivers / power supplies.

Ringdale is an ISO 9001:2000 company, registered under BSI certificate FM-1880. Ringdale provides products of the highest quality designed and manufactured in Texas, USA and in the United Kingdom.

NOTE: Mounting hardware is not included in the price.

ActiveLED® FL40-N Series sample Part Numbers:

FL40U-AT-NF5024WH, 40" 24/26 Watt White
FL40U-AT-NF5036WH, 40" 36/38 Watt White
FL40U-AT-NF5048SL, 40" 48/50 Watt Silver
FL40U-AT-NF5072BZ, 40" 72/75 Watt Bronze
FL40U-AT-NF5096BR, 40" 96/104 Watt Brown

Technical Information

Input Voltage:• Auto-sensing 100..277V AC, 50/60 Hz
• Digital Power Source, dedicated circuit strongly recommended
Operating Temperature:-58° F to +149° F (-50° C to +65° C)
Power Statistics:

Power Factor:
Dependent upon model:
• 26 to 104 Watt Fixtures
• 24 to 96 Watt LEDs

0.95 (at 208 Volts)
Light Output Equivalent:Up to 1,000 Watt legacy HID bulb technology
CCT Color Temperature:2700K, 3000K, 3500K, 4000K, 5000K in accordance with ANSI C78.377A
FL40 Flood Light Dimensions40.3" (l) x 6.1" (w) x 4.8" (h)(102.5 x 15.6 x 12.1)
FL40 Flood Light Weight:28 lb (12.7 Kg)
Listings and Tests:cUL Listed Driver, suitable for damp locations.
TM21 based on CALIPER ISTM Test to UL1598
CALIPER LM-79 Report, LM-80 info available
CE File, RoHS compliant, IP66 Rated.
Conforms to FCC Part 15.19 Subpart B Class A

Caution! All specifications published herein are subject to change without notice. See website ActiveLED.com for Terms and Conditions of use of the website and the information provided herein. See Ringdale website on www.ringdale-technology.com for Terms and Condtions of Sale and Service.

+44 (0)844 264 1570