FL40-Series ActiveLED® 40

  • DLC Certified and Listed versions of ActiveLED Flood Lights are available, please refer to relevant datasheet for specific model numbers.

  • FL40-W Series ActiveLED® 40" Flood Light with Traditional Light Pattern provides crisp bright accent lighting for retail, manufacturing and warehouse lighting while typically saving 85% in energy compared to legacy technology - 26 to 104 Watt fixtures

  • ActiveLED Series Floodlight Fixtures run significantly cooler and are therefore much safer to the touch than traditional HID technology. Replaces up to 1,000 Watt legacy bulb technology

  • High light output and a CCT5000K color temperature provides crisp, bright and even accent lighting that closely emulates natural daylight

  • Fraction of conventional lighting costs and very low maintenance cost with a Lumen Lifetime of 90,000 hours (90% Luminous Flux)

  • Available options for even greater energy savings:
    • Motion Sensor
    • Daylight Sensor
    • Dimming capabilities

    A 104 Watt Floodlight that is dimmed down to light level 40, when there is no motion sensed for example, consumes just 9.36 Watt (9% of 104 Watt), saving 94.64 Watt, 91%

  • Environmentally Safe Lighting:
    • Zero mercury content
    • Eliminates disposal of
    hazardous materials
    • Facilitates LEED® points

  • Choice of fixture color - Silver, Brown, White, Bronze or Charcoal Grey finish, other colors available on request.

    Precise adjustment of the angle of the flood light via the convenient end-mounting bolts (10mm) allows the fixture to be adjusted for maximum lighting effect

FL40-Extra Wide Series ActiveLED® 40" Area Flood Light with Extra Wide Area Light Pattern provides crisp bright accent lighting for retail, manufacturing and warehouse lighting

ActiveLED® flood lighting solves the problems of energy wastage, light pollution and maintenance. The design has optimized water management and cooling to be effective in the hottest of climates as well as performing without degradation down to -58° F (-50° C).

The FL40-W Series ActiveLED® Extra Wide Light Pattern Area Floodlight consumes at least 50-85 percent less energy than conventional lighting.
With its patented design and superior LED elements, the ActiveLED FL40-W is a reliable light source with a 90,000-hour lumen life (90% Luminous Flux), making it a maintenance-free solution for applications where changing bulbs and ballasts can be hazardous and expensive.

Significant additional energy savings from the device's optional daylight sensor, motion sensor and remote energy management features.

The FL40-W series ActiveLED Wide Pattern Flood Light provides crisp bright accent lighting for retail, manufacturing and warehouse lighting with a light that closely emulates the color of natural daylight.

All the available light is directed onto the area to be illuminated.

The employed technology delivers very precise light cut-off, virtually eliminating any light polution and overspill.

International Dark-Sky Association full cutoff compliant.

Fixture runs significantly cooler and is therefore much safer than traditional HID bulb technology.

FL40-T Series Product Overview

Ringdale provides five sizes of ActiveLED Traditional Pattern Flood Lights for varying applications, each with a choice of CCT color temperatures - 2700K, 3000K, 3500K, 4000K, 5000K:

Product Code

Length & Application

CCT Color


Light Output

Suggested Mount Hght


40", Area / Extra Wide


96 Watt

~15,600 Lumens

~4.5 m / 14 ft


40", Area / Extra Wide


96 Watt

~15,500 Lumens

4.5 m / 14 ft


40", Area / Extra Wide


96 Watt

~15,000 Lumens

4.5 m / 14 ft


40", Area / Extra Wide


96 Watt

~14,700 Lumens

4.5 m / 14 ft


40", Area / Extra Wide


96 Watt

~ 13,200 Lumens

4.3 m / 14 ft

ActiveLED® Technology

Ringdale uses the latest in energy efficient LEDs and LED Modules producing equal or greater light output than HID light fixtures. Our state-of-the-art electronics monitor current and temperature of the substrate to assure maximum performance under the prevailing environmental conditions and a Lumen Lifetime of 90,000 hours (90% Luminous Flux).

ActiveLED® Diffuser Technology

We use state-of-the-art diffuser technology with a minimal amount of light loss within the fixture providing for maximum lighting efficiency.

ActiveLED® Warranties

We provide mechanically robust outdoor lighting systems; our warranties are 10 years on LED elements, fixtures and drivers / power supplies.

Ringdale is an ISO 9001:2015 company, registered under BSI certificate FM-1880. Ringdale provides products of the highest quality designed and manufactured in Texas, USA and in the United Kingdom.

NOTE: Mounting hardware is not included in the price.

ActiveLED® FL40-T Series sample Part Numbers:

40" Flood Lights:
FL40-U-AT-X....WH, 40" 96 Watt White
FL40-U-AT-X...BR, 40" 96 Watt Brown

Technical Information

Input Voltage:• Auto-sensing 100..277V AC, 50/60 Hz
• Digital Power Source, dedicated circuit strongly recommended
Operating Temperature:-58° F to 149° F (-50° C to 65° C)
Power Statistics:

Power Factor:
Dependent upon model:
• 26 to 104 Watt Fixtures
• 24 to 96 Watt LEDs

0.95 (at 208 Volts)
Light Output Equivalent:Up to 1,000 Watt legacy HID bulb technology
CCT Color Temperatures:2700K, 3000K, 3500K, 4000K, 5000K in accordance with ANSI C78.377A
FL40 Flood Light Dimensions40" (l) x 6.1" (w) x 4.8" (h)(101.6 x 15.6 x 12.1)
FL40 Flood Light Weight:28 lb (12.7 Kg)
Listings and Tests:cUL Listed Driver, suitable for damp locations.
TM21 based on CALIPER ISTM Test to UL1598
CALIPER LM-79 Report, LM-80 info available
CE File, RoHS compliant, IP66 Rated.
Conforms to FCC Part 15.19 Subpart B Class A

Caution! All specifications published herein are subject to change without notice. See website ActiveLED.com for Terms and Conditions of use of the website and the information provided herein. See Ringdale website on www.ringdale-technology.com for Terms and Condtions of Sale and Service.

+44 (0)844 264 1570