EBBU-U: Integrated Remote Emergency Battery Backup Unit (EBBU-U) - option for ActiveLED® Lighting Fixtures

  • During a power outage the Remote Emergency Battery Backup Unit (EBBU-U) will power an ActiveLED® light fixture in Emergency mode for at least three hours, up to eight hours on a 6 Watt fixture

  • Self-contained housing includes an ActiveLED 30-Watt Driver, Battery Charger and state-of-the-art Lithium-Iron Phosphate (LiFePO4) battery pack, suitable for indoor use only

  • Clearly visible external LED displays the status of the EBBU Unit

  • Battery condition is managed for the maximum effective life by preventing under-charging and over-charging conditions

  • ActiveLED - Environmentally Safe Lighting:
    • Zero mercury content
    • Eliminates disposal of
    hazardous materials
    • Facilitates LEED® points

  • Suitable for indoor installation.
    Will require a suitable NEMA weatherproof enclosure if installed outdoors. Will also require weatherproof cable 07-06180002

  • Digitally dimmable via EDSaP devices or LightSpace Manager

Integrated Remote Emergency Battery Backup Unit (EBBU-U) option for ActiveLED® Light Fixtures - includes ActiveLED® Driver, Battery Charger and Lithium-Iron Phosphate (LiFePO4) Battery Pack

The Remote Emergency Battery Backup Unit (EBBU-U) is specifically designed to provide at least three hours of emergency battery backup power to any ActiveLED® Light Fixture, suitable for indoor use

The ActiveLED® Remote Integrated EBB Unit (EBBU-U) includes a 30-Watt ActiveLED Driver, 48 Volt DC Battery Pack (Lithium-Iron Phosphate) and Battery Charger that monitors and charges the battery as required.

Should the AC power to the EBBU Unit be disconnected or fail for any reason, the attached fixture will continue to operate on battery power and will automatically adjust its output level to an emergency power-saving mode to ensure operation for at least three hours, up to eight hours on a 6 Watt fixture.

When the AC power is restored to the EBBU Unit, it will maintain the emergency battery pack at its maximum capacity.

The EBBU Unit consists of a sealed DC Lithium-Iron Phosphate (LiFePO) battery pack, ActiveLED Driver and Battery Charger in a self-contained housing that is cable-connected to an ActiveLED light fixture.
The prerequisite for the EBBU Unit is a "remote" ActiveLED® light fixture without a power supply that is then cable-connected to the EBBU via a two-conductor low-voltage cable (18" 22 AWG cable supplied).

LED Status Indicator

A single LED is visible from the outside of the EBBU Unit housing to indicate the status of the battery pack, as follows:

Solid Red LED Battery is in operation, powering the attached light fixture.
Flashing Red LED Battery condition is too low to power the attached light fixture.
Solid Green LED Battery condition is good and is not in operation, it is being maintained at full capacity by the R-EBBU.

ActiveLED® Technology

Ringdale uses the latest in energy efficient LEDs and LED modules producing equivalent or greater light output than fluorescent (HID) fixtures. Our state-of-the-art electronics monitor current and temperature of the substrate to assure maximum performance under the prevailing environmental conditions and a Lumen Lifetime of 90,000 hours (90% Luminous Flux).

ActiveLED® Warranties

We provide mechanically robust outdoor lighting systems; our warranties are 10 years on LED elements, fixtures, power supplies / drivers and 10 years on this Remote Emergency Battery Backup Unit.

Ringdale is an ISO 9001:2000 company, registered under BSI certificate FM-1880. Ringdale provides products of the highest quality designed and manufactured in Texas, USA and in the United Kingdom.

ActiveLED® EBBU Unit Part Number: EBBU-U-LIF-32180

Technical Information

Dimensions:• 14.0” (L) x 3.8" (W) x 2.9 (H) (35.6 x 9.5 x 7.4 cm)
Operating Temperature:
11.4 lbs, 5.1 Kg

-20° C to +40° C (-4° F to +104° F)
Input Voltage:100..277V-AC, 50 or 60Hz, max 32 Watts
Battery / Endurance:Lithium-Iron Phosphate (LiFePO4) deep-cycle.
At least three hours from a fully-charged state
Connection to LED Light:2-Conductor 22 SWG low-voltage cable (18" long included), suitable for indoors use only
Prerequisite:ActiveLED fixture without a power supply / driver
Suitability:• For indoor installation.

• If installed outdoors, will require weatherproof cable 07-06180002 and
suitable NEMA weatherproof enclosure

Part Number:
10 years


Caution! All specifications published herein are subject to change without notice. See website ActiveLED.com for Terms and Conditions of use of the website and the information provided herein. See Ringdale website on www.ringdale-technology.com for Terms and Condtions of Sale and Service.

+44 (0)844 264 1570