SL1 Series ActiveLED® Street, Parking Lot and Pathway Lights - UL ANSI-136.31-2001 3G Vibration Tested

  • SL1 Series ActiveLED® Streetlight, Parking Lot and Pathway Lights - Significant Energy Savings compared to conventional HPS lighting and very low maintenance costs
    Optional Motion Sensor provides IR Programmability

  • Ideal applications include:
    • Streets
    • Parking lots
    • Pedestrian areas
    • Other outdoor applications

  • L90% Lumen Lifetime of 90,000 hours (min 90% Luminous Flux)

    ANSI-136.31-2001 Roadway Tested (2013)

    Upward Light Output Ratio (ULOR) = 0
    Metal Wildlife Intrusion Protection at Tenon Entry

  • Environmentally Safe Lighting:
    • Zero mercury content
    • Eliminates disposal of
    hazardous materials
    • Facilitates LEED® points

  • Daylight Sensor included
    (with manual override switch).
    Optional controls for additional energy savings:
    • Twist-Lock Photocell
    • Motion Sensor
    • Digital Rotary Dimmer
    • LightSpace Management
    • Battery Backup for
    emergency lighting
    • Solar backup / Solar ready

    A 50 Watt street light that is dimmed down to level 40, when no motion is sensed, consumes just 4.5 Watt (9% of 50 Watt), 91% energy saving

  • Optional Programmable Motion Sensor includes an integrated IR (Infrared) Receiver that facilitates the ability to remotely program and re-program the Streetlight's lighting parameters.

    Maximum and minimum light levels and motion sensor timings are easily reprogrammed using the ActiveLED optional remote hand-held IR Programmer, see separate datasheet for details.

    Choice of light fixture wattage, see table for details

  • Choice of Silver, White, Charcoal Grey, Bronze or Brown finish.
    Custom colors available on request

  • Choice of Clear or Mottled second Diffuser.
    Choice of Traditional, Wide or Xtra-Wide Light Pattern

SL1 Series ActiveLED® Streetlight

Parking Lot and Pathway Lights - UL ANSI C136.31-2001 3G Vibration Tested, choice of 26, 50, 75, 104 or 150 Watt fixtures.
Optional Motion Sensor provides IR Programmability

The ActiveLED® Street / Parking Lot Light consumes at least 50-85 percent less energy than conventional lighting and has a dusk-to-dawn sensor that provides additional energy savings. Cost effective to install - Light output similar to 150 through 1000 Watt HPS - Tenon or Mast mountable

With its patented design and superior LED elements, the ActiveLED Streetlight / Parking Lot Light is a reliable light source with a 90,000-hour lumen life, making it a maintenance-free solution for applications where changing bulbs and ballasts can be hazardous and expensive.

Optional Motion Sensor includes an integrated IR (Infrared) Receiver that facilitates the ability to program and re-program the Streetlight's lighting parameters. Maximum and minimum light levels and motion sensor/ dusk-to-dawn timings are easily reprogrammed using the ActiveLED remote hand-held IR Programmer, part number 00-27-0100-0000, for details CLICK HERE

The only servicing required is the occasional cleaning of the diffuser, equivalent to the cleaning of conventional streetlights.

ActiveLED® SL Series Product Overview

ActiveLED provides five basic sizes (light output) of Professional ActiveLED Streetlight Fixtures for different applications:

Product Code



Light Output

Suggested Mount Height


Pathway / Parking Lot

26 Watt

~87 Lumens /Watt

4.0 m / 13 ft


Street / Highway

52 Watt

~87 Lumens / Watt

6.0 m / 20 ft


Pathway / Parking Lot

26 Watt

~87 Lumens / Watt

4.0 m / 13 ft


Street / Highway

50 Watt

~87 Lumens / Watt

6.0 m / 20 ft


Street / Highway

75 Watt

~87 Lumens / Watt

9.0 m / 30 ft


Street / Highway

104 Watt

~87 Lumens / Watt

9.0 m / 30 ft


Street / Highway

150 Watt

~87 Lumens / Watt

10.0 m / 33 ft

ActiveLED® Similar Products

ActiveLED Street Lighting products provide superior surface illumination for increased safety and security as brighter, whiter light makes it easier to see detail and color. ActiveLED fixtures direct all light evenly to the target surface minimizing light pollution outside the targeted area while improving overall visibility.

ActiveLED® Technology

ActiveLED uses the latest in energy efficient LEDs and LED Modules producing equal or greater light output than fluorescent light fixtures. Our state-of-the-art electronics monitor current and temperature of the substrate to assure maximum performance under the prevailing environmental conditions and a Lumen Lifetime of 90,000 hours (90% Luminous Flux).

ActiveLED® Diffuser Technology

We use state-of-the-art diffuser technology with a minimal amount of light loss within the fixture providing for maximum lighting efficiency.

To meet varying application requirements, the ActiveLED Streetlight can be configured with a clear or mottled second diffuser that also completely seals the underside of the fixture from the ingress of weather and insect.

ActiveLED® Light Pattern Options

The ActiveLED Streetlights are available in either Traditional, Wide, Xtra Wide or All Forward light pattern configurations.

The Traditional Pattern, mounted at 20 feet high, projects light 3-4 feet behind the pole and has an illumination pattern on the street-side in an arc of about 30 feet.

The Wide Pattern has a broad uniform light coverage. Mounted at 20 feet high, it has a very precise 1-2 foot curb-side cut-off with very little light projected behind the curb line. It has an illumination pattern on the street-side in an arc of about 40-50 feet on each side of the curb line extending to 60 feet perpendicular at 90 degrees from the curb line on the street side.

ActiveLED® Warranties

We provide mechanically robust outdoor lighting systems; our warranties are 10 years on LED elements, fixtures and drivers / power supplies.

Extended 2 year Warranty is available when a SL Series fixture is used in conjunction with an ActiveLED Surge Protection Device (SPD). See “Limited Warranty for ActiveLED Lighting Products” or to see the warranty document CLICK HERE.

ActiveLED is an ISO 9001:2008 company, registered under BSI certificate FM-1880. ActiveLED provides products of the highest quality designed and manufactured in Texas, USA and in the United Kingdom.

ActiveLED® SL Series Street Light Options & Selections

Each ActiveLED street light can be configured from a comprehensive list of options that tailor the fixture to most applications:

• LED Light Output

Select 24, 48, 72, 96 or 144 Watt LEDs (26, 50, 75, 104 or 150 Watt Fixtures)

• Light Pattern

Select Traditional, Wide, Xtra-Wide or All-Forward

• Fixture Color

Select Silver, White, Charcoal Grey, Bronze or Brown

• Second Diffuser

Select Clear, Mottled or Impact Resistant

• Daylight Sensor

Built-in button style or Twist-Lock photocell, user enables or disables via switch.

• Energy Management

Optional Motion Sensor, Dimming, IR Receiver

• Driver Options

Select AC only, AC with Solar Backup or Solar Only

• Marine Options

Optional Marine Quality fixtures are fully enclosed and have been designed specifically to be impervious to harsh marine applications, including salt water, torrential rain and high winds.

• Mount Configurations

Specify Square Pole mount, Round Arm mount (maximum 2" pipe, 2-3/8" OD) or Pole Top mount

• Mounting Option (1)

Optional Adapter for mounting Pole Mount version on a Round Extension Arm
(Part Number 00-27-0002-0003)

• Mounting Option (2)

Optional 6.5" Extension Mounting Bracket
(Part Number 00-27-0002-00xx)

• Mounting Option (3)

Optional Adapters for mounting on Round / Square / Wood Pole
(Part Number 00-27-0009-0001, 00-27-0009-0002)

NOTE: Pole and Pole Base are not included in the price.

SL Series SAMPLE Part Numbers:

SL1UD-SP-WF5024, Square Pole Mount, Wide Pattern
SL1UD-RM-XF5072, Round Arm Mount, Xtra-Wide Pattern
SL1UD-SP-TF5048, Square Pole Mount, Traditional Pattern
SL1UD-SP-AF5048, Square Pole Mount, All-Forward Pattern

Optional Remote Hand-Held IR Programmer, part number 00-27-0101-0000, for details CLICK HERE

Technical Information

Input Voltage:• Auto-sensing 100..277V AC, 50/60 Hz
• Digital Power Source, dedicated circuit strongly recommended
Power Statistics:Dependent upon model selected:
• 24, 48, 72, 96 or 144 Watt LEDs
• 26, 50, 75, 104 or 150 Watt Fixtures
Power Factor & THD:PF: > 0.95.THD: <20%
Listings & TestscUL Listed Driver, suitable for damp locations.
TM21 based on CALIPER ISTM Test to UL1598
CALIPER LM-79 Report, LM-80 info available
CE File, RoHS compliant, IP66 Rated.
Conforms to FCC Part 15.19 Subpart B Class A
Operating Temperature:-58° F to +149° F (-50° F to +65° C)

6"W x 4"H x 30"L(15.2 x 10.2 x 76.2 cm)

20.5 lbs (9.3 Kg)
Motion Sensor / IR Statistics:• Motion Sensor to 35 feet.
• Remote IR Programming - Line-of-sight to 50 feet.
CCT Color Temperature:

2700K, 300K, 3500K, 4000K, 5000K in accordance with ANSI C78.377A

75 - 450 Watt HPS / HID fixtures

Caution! All specifications published herein are subject to change without notice. See website for Terms and Conditions of use of the website and the information provided herein. See Ringdale website on for Terms and Condtions of Sale and Service.

+44 (0)844 264 1570